Machine Injury & Accidents

Date	City	State	Employer	Body Part	Event
2021-11-10	New Berlin	Wi	Kelmann Corp.	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to trim wood pieces. The saw amputated the employee's left index fingertip.
2021-11-08	Tulsa	Ok	Shielding Resources Group, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a two-by-four using a table saw. The employee used his left hand to guide the two-by-four through the saw when a kickback occurred, drawing the employee's hand into the saw blade and resulting in partial amputations of the index and ring fingers.
2021-11-08	Atlanta	Ga	Against The Grain Tops, Co.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a push stick to cut wood on a table saw when the push stick slipped and the saw blade contacted the employee's left thumb and index finger, resulting in amputations.
2021-10-22	Atlanta	Ga	Ambient Sounds Productions LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting wood with a table saw. The saw partially amputated his right thumb.
2021-10-20	Nampa	Id	Patrick Millwork, Inc	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was operating a table saw and lacerated their thumb, resulting in surgical amputation of the thumb tip.
2021-10-11	Beverly	Ma	North Shore Fence Corp	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting wood using a table saw. The sawblade amputated the employee's middle finger. The saw was not guarded at the time.
2021-10-11	Denver	Co	Leedo Cabinetry, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was ripping a 1-inch piece of wood down to 3/4 inch using a table saw. The sawblade amputated the employee's middle finger.
2021-09-27	Pittsfield	Me	Walpole Outdoors, LLC	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was cutting a length of vinyl material with a table saw. The employee's hand slipped and the sawblade amputated the tip of his thumb.
2021-09-23	Kindred	Nd	DR Millwork Company	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting laminate on a table saw. The blade amputated the employee's thumb and severely lacerated the palm.
2021-09-21	Washington	Dc	TSI Architectural Metals, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was operating a table saw when the saw amputated their right index finger.
2021-09-20	Fort Worth	Tx	North Texas Flameproof & Wood Specialty	Finger(s), fingernail(s)	Caught in running equipment or machinery during regular operation
A blade change was underway on a table saw. An employee plugged the saw back in to complete a test cut; the wood caught and the employee's thumb was pulled into the blade and lacerated. The employee was hospitalized.
2021-09-16	Deland	Fl	Mystic Powerboats	Fingertip(s)	Struck against moving part of machinery or equipment
On September 16, 2021, an employee was cutting compressed foam with a table saw when the sawblade amputated the tip of his right thumb (without bone loss).
2021-09-04	Easton	Pa	MINZNER & COMPANY	Abdomen, except internal location of diseases or disorders	Struck by dislodged flying object, particle
An employee was operating a table saw. The wood kicked and a shard of it pierced the employee's abdomen.
2021-09-01	Rocky Hill	Ct	Numotion	Hand(s)	Struck against moving part of machinery or equipment
An employee was cutting a plastic tray on a table saw when their hand was cut by the saw.
2021-08-25	Kamiah	Id	Marlette Homes	Finger(s), fingernail(s)	Caught in running equipment or machinery during regular operation
An employee was using a table saw to cut laminate flooring. The saw kicked back and the employee's fingers were amputated.
2021-08-24	Lebanon	Mo	MARINE ELECTRICAL PRODUCTS	Finger(s), fingernail(s)	Caught in running equipment or machinery during maintenance, cleaning
An employee was operating a table saw when the guard got stuck. As the employee was freeing the guard, their gloved hand was caught by the sawblade and drawn in. The employee sustained a finger amputation.
2021-08-16	Washington	Dc	National Park Service	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a block of wood with a table saw when the block slipped and the table saw lacerated four fingers on their right hand, resulting in hospitalization.
2021-08-11	Medford	Nj	Carter Lumber	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a piece of poplar on a table saw. The rotating blade cut the employee's thumb. The employee was hospitalized.
2021-08-05	Millbury	Oh	Carter Lumber dba Carter Components	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was ripping plywood across a table saw. The saw blade cut the employee, resulting in the amputation of the employee's left middle and ring fingers.
2021-07-27	West Roxbury	Ma	PRG CONSTRUCTION INC	Nonclassifiable	Contact with objects and equipment
An employee suffered an amputation while working on a table saw.
2021-07-21	Keene	Nh	DEW Construction	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a 2 x 4 on edge using a table saw. The push stick he was using broke and his left thumb slipped into the saw blade. Three-quarters of the thumb was amputated.
2021-07-19	Arcanum	Oh	Measureable Improvements LLc	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was holding wood down on a table saw. The sawblade amputated the employee's left thumb.
2021-07-14	Naples	Fl	RIZZO PROPERTY MAINTENANCE, INC	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was cutting laminated flooring with a portable table saw and amputated the tip of his left thumb.
2021-07-14	Mukwonago	Wi	S & R Egg Farm, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting wood on a table saw and amputated part of their thumb.
2021-07-05	South Bloomfield	Oh	Limited Contracting Co., Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to cut extruded polystyrene. The saw cut the employee's fingers, causing partial amputations to the index and middle fingers.
2021-06-15	Boulder	Co	BALL AEROSPACE AND TECHNOLOGIES CORP.	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was cutting a 4-foot by 8-foot piece of plywood on a table saw. The saw amputated the tip of the employee's left thumb.
2021-06-07	Natick	Ma	W. J. Hulbig Construction Co., Inc	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to a rip a beveled edge in a 2-by-8. His right hand contacted a blade on the saw, which caused the amputation of several of his fingers. The blade was unguarded at the time.
2021-06-03	Cincinnati	Oh	DBGC, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was operating a table saw when it amputated his left thumb.
2021-06-01	Wyoming	Ny	AKA Enterprises	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw and amputated his left pinky finger.
2021-05-27	Bismarck	Nd	Roers West Construction LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to cut cabinet filler boards. The saw amputated their left thumb between the fingernail and knuckle.
2021-05-20	Sioux Falls	Sd	GAGE BROTHERS CONCRETE PRODUCTS, INC.	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was ripping 2x4 boards on a table saw. A board kicked back and the employee's left hand contacted the blade. The employee sustained a fingertip amputation.
2021-05-20	Reading	Pa	CRAFT-MAID KITCHENS, INCORPORATED	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting wood on a table saw when the wood kicked back and knocked the employee's hand into the saw blade. The employee suffered a severe laceration to the left hand and an amputation to the left index finger.
2021-05-19	Cassville	Mo	JUSTIN BRANDS	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was operating a table saw and amputated a finger on their left hand.
2021-05-07	Harvey	La	Jefferson Door Company	Finger(s), fingernail(s)	Caught in running equipment or machinery during regular operation
An employee was cutting wood with a table saw when his glove got caught in the saw and his hand was pulled into the saw, resulting in a partial amputation of his left thumb.
2021-05-06	Abbotsford	Wi	Witmer Industries Inc.	Fingertip(s)	Contact with objects and equipment
An employee was setting the blade depth on a table saw before beginning a production run of parts and lacerated the tip of her left index finger. The fingertip was medically amputated.
2021-05-04	Waverly	Ny	Rynone Manufacturing Corp	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was feeding stock through a table saw when their hand contacted the saw blade, resulting in an amputation of their left index finger above the middle knuckle.
2021-05-03	Long Island City	Ny	Jouffre Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a slat of pinewood on a table saw. The sawblade cut the employee's right thumb.
2021-04-21	Leechburg	Pa	Leading Technologies, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was operating a table saw. The sawblade caused an amputation to the employee's right index finger.
2021-04-13	Allston	Ma	STARLITE BUILDING SERVICES INC.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a piece of baseboard with a table saw and lacerated their fingers. The saw was not guarded at the time of the incident.
2021-04-05	Webster	Ny	Studco Buillding Systems LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting plywood using a table saw. The employee's left hand slipped and contacted the saw blade, resulting in a laceration to the index and middle fingers.
2021-03-31	Denver	Co	Innovations Manufacturing, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting lumber on a table saw when their left hand contacted the saw, resulting in lacerations to three fingers that required surgery.
2021-03-29	Keasbey	Nj	FedEx Ground	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to cut plastic for conveyor belt transition plates when the saw came into contact with their left pinky finger, resulting in a broken bone and laceration.
2021-03-24	Lufkin	Tx	Lufkin Gears - Baker Hughes	Fingertip(s)	Struck against moving part of machinery or equipment
On 3/24/2021, at 11:30 AM, an employee was cutting a small piece of lumber on a table saw. The employee was removing the scrap piece when his left index finger contacted the moving blade and the fingertip was amputated.
2021-03-23	Birmingham	Al	Diversified Maintenance - RWS, LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to cut a piece of wood. The wood jumped, causing the sawblade to amputate the employee's middle finger.
2021-03-08	Maurepas	La	Diamond 'S' Builders, L.C.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
A carpenter was ripping 1-by-4 material to the required size with a table saw. The sawblade severed his right index finger just below the second knuckle. The finger was medically amputated.
2021-03-04	Lindenhurst	Ny	American Building Contractors Associates Inc.	Fingertip(s)	Struck against moving part of machinery or equipment
A table saw lacerated four fingertips on an employee's right hand. The employee was hospitalized.
2021-03-02	Medina	Oh	Alberino Construction	Nonclassifiable	Struck against moving part of machinery or equipment
An employee was using a table saw when they contacted the saw blade, resulting in a severe laceration.
2021-03-01	Streetsboro	Oh	Canal City Contracting, LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
On 3/01/2021, an employee was cutting a piece of wood using a table saw when a kickback occurred, resulting in a partial amputation of the left thumb.
2021-02-25	Elberton	Ga	Baston Monuments, Inc.	Arm(s)	Struck against moving part of machinery or equipment
An employee was sawing wood block strips with a table saw and sustained a severe laceration across the top of the left arm.
2021-02-25	Ashland	Oh	Cabinet Restylers	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to cut molding pieces and amputated their right index finger. The guard was raised at the time.
2021-02-25	Rockport	Ma	Smith Ace Hardware & Lumber	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting wood with a table saw and suffered a partial thumb amputation.
2021-02-12	Easthampton	Ma	R & R Window Contractors, Inc.	Finger(s), fingernail(s)	Caught in or compressed by equipment or objects
On February 12, 2021, an employee was clearing a jam on a table saw and crushed his right little finger.
2021-02-10	Houston	Tx	Houston Shutters LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting tilt rods for shutters using an electric table saw. The employee's left hand fingers contacted the blade, causing an amputation to the middle finger up to the nail bed with bone loss, soft tissue removal to the inner part of the index finger and a nail bed avulsion to the thumb.
2021-02-10	Utica	Ny	Munson Machinery Co., Inc.	Fingertip(s)	Caught in running equipment or machinery during regular operation
An employee was using a radial table saw when his glove became caught in the blade pulling his right thumb into the point of operation and causing a thumb tip amputation. The saw was unguarded at the time.
2021-02-05	Houston	Tx	84 Lumber Company	Finger(s), fingernail(s)	Caught in running equipment or machinery during maintenance, cleaning
An employee was about to begin repairs to the belt and pulley system of a table saw motor when the machine started and amputated two fingers on their right hand.
2021-01-29	Oakdale	La	Federal Correctional Complex Oakdale, LA	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to rip a board. The board became jammed and while trying to unjam the board, the employee's right thumb made contacted the rotating blade, resulting in a deep laceration to the right thumb.
2021-01-25	Petal	Ms	Advanced Building Specialties, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a board on a table saw. The saw kicked back and the blade amputated the employee's left index, middle, and ring fingers. The blade was unguarded at the time.
2021-01-22	Springfield	Nj	United Window & Door Manufacturing, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to cut wood pieces. The saw caught his left hand, amputating his left index and middle fingers and almost removing the ring finger. All three fingers were ultimately amputated.
2021-01-06	Jamestown	Ny	Blackstone-NEY Ultrasonics	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was cutting wood on a table saw and amputated a fingertip.
2020-10-15	Grayslake	Il	Federal Express Corporation	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was cutting a 2x4 on a table saw and amputated the tip of their right thumb.
2020-10-08	Rice Lake	Wi	MASTERCRAFT INDUSTRIES, INC.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was brushing wood off a table saw. The saw amputated the employee's right index, middle, and ring fingers to the first knuckle.
2020-10-08	Charm	Oh	Keim Lumber	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to rip a door jamb to size. The saw amputated the employee's right middle finger between the first and second knuckles, as well as causing injuries to the thumb and index finger that required stitches.
2020-10-02	Shawnee	Ks	Ultimate LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was operating a table saw when his finger was caught in the saw's blade and amputated at the knuckle.
2020-10-01	Lake Delton	Wi	Kalahari Manufacturing LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting wood on a table saw when the wood kicked back and the employee's hand slipped, making contact with the saw blade. The left thumb was amputated at the knuckle.
2020-09-04	Cincinnati	Oh	Flipside Products, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was feeding wood stock into a table saw and sustained an amputation injury (bone chip) to their left thumb.
2020-09-01	Branson	Mo	Kanakuk Ministries	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a board on a table saw. The board kicked back and the employee's right ring finger was partially amputated by the blade.
2020-08-26	New Haven	Ct	R & B Ceramic Tile and Floor Covering, Inc.	Abdomen, except internal location of diseases or disorders	Struck by discharged object or substance
An employee was cutting 3/4" x 2.25" floorboards with a saw-stop table saw. While he was attempting to cut a plank, the board kicked back and struck his lower right abdomen. He suffered a perforated intestine.
2020-08-25	Niles	Il	Woodward, MPC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a piece of foam on a table saw. The material kicked back and the saw cut three fingers on the employee's left hand. The little finger needed partial surgical amputation.
2020-08-19	Yorktown	Va	Yorktown Naval Weapons Stations - Fire Station 14	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting 3/4-inch plywood with a table saw. The saw lacerated the employee's left thumb. The employee was hospitalized for surgery to repair the injury.
2020-08-10	Palmyra	Wi	Wicks Wood Floors, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
At about 9:00 a.m. on August 10, 2020, an employee was using a table saw to rip a piece of hardwood flooring when the wood kicked back and the employee's left hand was pulled into the blade. The employee suffered partial amputations to three fingers on the left hand.
2020-08-10	Apple Creek	Oh	Millwood Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a piece of plywood on a table saw. His left hand came into contact with the sawblade, which partially amputated the first and second fingers.
2020-08-03	Miami	Fl	Telemundo Network Group LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting lumber on a table saw. The sawblade amputated part of the employee's left index finger.
2020-07-29	Vidor	Texas	Tay-Burn Industries, Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting wood on a table saw. The employee reached for a piece of wood to cut; the sawblade caught the wood and the employee's hand was pulled into the blade. The employee's left index, middle, and ring fingers were amputated, along with the tip of the thumb.
2020-07-25	Wooster	Ohio	Riceland Cabinet Corporation	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was assembling cabinet frames. While using a table saw, the third and fourth fingers on his left hand were partially amputated.
2020-07-21	Duluth	Georgia	US Lumber Group, LLC	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was using a table saw equipped with a dado blade to cut a notch in a board. When the employee turned on the saw, the dado blade caught the board and kicked it back, causing the employee's left hand to contact the dado blade. Three fingertips were amputated.
2020-07-18	Denver	Colorado	Griffis Blessing, Inc	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
After cutting wood on a table saw, an employee turned the saw off and attempted to grab the cut pieces of wood. The still-rotating blade then partially amputated his right ring finger and amputated his right middle finger and right index fingertip.
2020-07-16	Fort Collins	Colorado	AAA Roofing and Construction, LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to cut through 2 inches of ISO insulation when his thumb was amputated. It was later reattached during surgery. The palm of the hand was also injured. The employee was hospitalized.
2020-06-10	Eastaboga	Alabama	Kronospan LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a laminated board with a table saw. The sawblade amputated the employee's right thumb and ring finger and lacerated the index and middle fingers.
2020-06-09	Baldwinsville	New York	Superior Packaging Solutions & Services	Fingertip(s)	Fall onto or against object on same level, n.e.c.
After cutting a board on a table saw, an employee was walking away from the saw when he tripped. His left hand came into contact with the saw's spinning blade; the index fingertip was amputated and the thumb was broken.
2020-06-05	Marshall	Wisconsin	AUBURN RIDGE	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
On June 5, 2020, an employee was using a table saw to cut wood trim when the blade caused lacerations to the middle finger, index finger, and thumb of the left hand requiring hospitalization.
2020-06-03	Independence	Missouri	Goad Company	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting plastic with a table saw. His left hand slipped, broke the guard, and was drawn into the blade. The employee suffered a partial amputation to the left little finger.
2020-06-01	Oconto	Wisconsin	Marine Technology Inc	Finger(s), fingernail(s)	Caught in running equipment or machinery during regular operation
An employee was using a table saw to cut thin foam material when his glove was pulled into the blade and his right index finger was amputated.
2020-05-20	Oklahoma City	Oklahoma	McClarin Plastics, LLC	Hand(s) and finger(s)	Struck against moving part of machinery or equipment
An employee was maneuvering a piece of melamine material through a table saw. The employee's hand came into contact with the spinning sawblade, which cut his hand and finger.
2020-05-15	Boystown	Nebraska	Father Flanagans Boys' Home	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was cutting a piece of wood with a table saw when the wood kicked back and pulled his hand toward the blade, resulting in a left middle fingertip amputation.
2020-05-13	East Palatka	Florida	Hitchcock's Market	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was slicing a ham on a table saw when the ham flipped in his hand and his hand came in contact with the blade, amputating his right index fingertip.
2020-05-11	Mckeesport	Pennsylvania	Ryco Inc.	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting a piece of Styrofoam on a table saw when his left hand came in contact with the table saw blade, cutting three fingers.
2020-05-05	San Antonio	Texas	Napco Pre-Cast	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was trimming a sheet of plywood on a table saw. The blade caught his fingers, amputating the tip of his right index finger.
2020-04-20	Hollywood	Florida	Hollywood Woodwork Inc.	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was operating a table saw when the saw's power was cut. His right ring finger made contact with the saw as it was slowing down, and the fingertip was partially amputated.
2020-04-14	Peoria	Illinois	Roecker's, Inc. dba Roecker Cabinets	Hand(s)	Struck against moving part of machinery or equipment
At about 9:30 a.m. on April 14, 2020, an employee was operating a table saw when it cut his hand. He was hospitalized.
2020-03-31	Janesville	Wisconsin	Gallina USA LLC	Fingertip(s)	Struck against moving part of machinery or equipment
On March 31, 2020, an employee was cutting sheets of plastic on a table saw. The saw blade amputated the tip of the employee's right index finger.
2020-03-24	Denver	Colorado	DENVER REEL AND PALLET	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting wood stock on a table saw. The saw amputated three fingers on the employee's right hand.
2020-03-19	Youngstown	Florida	E.F. San Juan, Inc.	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was ripping 3/4-inch strips of wood using a table saw when his hand contacted the blade, resulting in an amputation his left middle and pointer fingertips.
2020-03-16	Overland Park	Kansas	McCarthy Building Companies, Inc	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw. The employee's hand slipped and contacted the running blade; the employee suffered an amputation to a finger.
2020-03-15	Sebring	Florida	SIMMONS SOLID SURFACE LLC	Nonclassifiable	Struck against moving part of machinery or equipment
An employee was using a table saw when his right thumb tip was amputated at the first knuckle. The employee was hospitalized and underwent surgery. The table saw was unguarded at the time.
2020-03-14	Coolidge	Arizona	National Park Service	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
While an employee was cutting plywood using a table saw, the plywood bound up on the saw. When the wood suddenly became free, the employee's left hand contacted the saw blade. The employee sustained a partial amputation of the left index finger.
2020-03-10	Clinton	Oklahoma	SportChassis, LLC	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was using a table saw to cut plastic when the blade amputated the left middle and ring fingers.
2020-03-04	Key West	Florida	Labor Finders of Miami	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
A temporary employee was cutting wood on a table saw. The wood kicked up and the blade amputated the employee's left middle finger.
2020-03-04	Boston	Massachusett	Bay Cove Human Services, Inc	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
On March 4, 2020, an employee was using a table saw when he noticed that the dust collecting vacuum appeared to be clogged. He was reaching to tap the hose/vacuum when his hand hit the moving blade, severely lacerating two fingers.
2020-03-03	Del Valle	Texas	Dovetail Custom Woodworks	Finger(s), fingernail(s)	Struck against moving part of machinery or equipment
An employee was cutting plywood with a table saw and amputated his left thumb. His left index finger suffered a partial amputation.
2020-03-02	Petaluma	California	U.S.C.G. Training Center Petaluma	Fingertip(s)	Struck against moving part of machinery or equipment
An employee was cutting a small narrow piece of wood with a table saw and using a push stick. After finishing the necessary cut, the employee reached to shut the machine off. While reaching for the stop button, the employee's hand entered the vicinity of the blade before it had come to a complete stop. Three fingertips came in contact with the blade, resulting in fingertip amputations.